AAA Products KD2QR Palm Button Valve

The KD2QR is a 1/4″ NPTF side ported, 2 position, detent, palm operated valve. The internal spool is shifted by pulling or pushing the palm knob. The spool remains in detented position when the knob is released. Greater port pressures may require greater shifting force. The panel mount option allows the valve to be mounted on a panel up to 1/4″ thick through a 7/8″ diameter hole. Lead Time: 1 Week AROPressure: 15 to 250 psi on the main body of the valve.
Vacuum: The five main ports can be operated on industrial vacuum to 28″ Hg, based on a 30″ barometer.
Temperature: -20°F to 250°F. Caution: If it is possible that the ambient temperature may fall below freezing, the medium must be moisture free to prevent internal damage or unpredictable behavior.
Mounting: The valve can be mounted in any orientation.
O-Rings: Viton.
Materials: Black anodized 6061-T6 aluminum body, hard anodized aluminum spool, A380 aluminum end caps, palm knob, composite gaskets, steel fasteners.
Flow: 73.9 SCFM, 1.6 Cv
Repair Kit: ERKV-3.
3-Way or 5-Way: While this valve is basically 4-way, it can be used for 5-way service by using ports 2 or 4 as an inlet, or 3-way service by plugging the unused port 2 or 4.
Fluid Media: Soft seal models are made for air, vacuum, and gases compatible with component materials. They should not be used with liquids.
Weight: 1.6 lbs ± 5%.